Asrock H55M Pro Driver
ASRock H55M Pro is company's only motherboard of the new series that has the standard width. All other microATX models feature narrower PCBs, since no. ASRock H55M Pro - motherboard - micro ATX - LGA Socket - H55 overview and full product specs on CNET. ASRock DuraCap ( x longer life time), % Japan made high quality conductive polymer capacitors; Supports Dual Channel DDR3 +(OC); Supports.
|Supported systems:||Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP|
|Price:||Free* [*Free Registration Required]|
Asrock H55M Pro Driver
They say little things come in big packages and that saying holds true for this new motherboard. The H55 falls in line with all the other early released Hbased Asrock H55M Pro with its size: This new chip set was aimed at the media buff as well as the consumer that is not looking to game a lot.
ASRock H55M Pro, LGA /Sockel H, Intel Motherboard eBay
But if you do you can always add a GPU later. The small size does not take away from the fact that this is a complete motherboard.
The layout is about as perfect as you can get when trying to pack all the connectors, slot and plugs onto such a small surface area. This color is Asrock H55M Pro more attractive than the teal color of their older boards. We begin our tour in the upper right hand corner where the DIMM slots dominate.
Many of the mATX produced at limited to just two memory slots. Asrock packed four on this board. This gives the board a maximum of 16GB of ram support.
ASRock H55M Pro, LGA Socket, Intel Motherboard eBay
What is even better the slots support up to DDR3 and beyond. So this should be a decent ram overclocking board. To the right of the ram slots are five SATA 2 plugs. Unfortunately Asrock elected to skip Raid Asrock H55M Pro this model.
Intel Gigabit Ethernet Ports: Click to enlarge Despite the socket comparability between Clarkdale and Lynnfield LGA CPUs, to Asrock H55M Pro the most out of overclocking you should buy the corresponding chipset. The bottom line is that if you want a Core i, go H55, but if you're upgrading performance to i grab a cheap P55 board. Transferring your cooler from Asrock H55M Pro old PC to your new one will help to reduce the cost of upgrading, so it's an instant plus for ASRock.
As you can see, ASRock preferred simple cooling in this case. The chipset is covered by a heatsink, while CPU power converter is not cooled at all.
If you make sure that the CPU cooler drives air towards the rear panel, you may forget about additional cooling at all. In the latter case you won't have to run the Windows utility.
Well, unless you want to monitor the PWM controller state. The motherboard doesn't have any other peculiarities. Note that you'll have to rotate it a bit relative to the standard Socket mounting holes. Speaking of Asrock H55M Pro utilities, there are only a few: However, company's marketing department comes up with new ideas which are quite, umm, original.